You are currently viewing How to Install Rear Seat Belts on Jeep Wrangler?

How to Install Rear Seat Belts on Jeep Wrangler?

Jeep Wrangler is a unique vehicle with more removable parts than any vehicle, and the rear seat belts are not an exception. You can remove the doors, roof, windows, and even the rear seats when planning on getting more friends for your adventure. 

You will require to put some of the things you removed from your Jeep Wrangler at some point or another. For example, if you had your rear seat belts out or need to replace them, you may wonder how to install the seat belts back on your Jeep Wrangler. Read on for a step-by-step guide on how you can install rear seat belts on jeep wrangler. 

Do Jeep Wrangler Comes with Seat Belts? 

All Jeeps come with both front and rear seat belts. Having seat belts is a requirement of a car, and everyone should be buckled up whether on the road r offloading. They offer safety for especially when one is involved in an accident. 

Types of Seat Belts

When it comes to seat belts, there are not many fitments or sizes, but the differences range from children to adults. Below are seatbelts that are categorized for both children and adults.

Seat belts for adults

There are two types of seat belts available in the market which are made for adults, the shoulder seat belt and lap seat belt. Shoulder and lap seat belts offer more protection to people who are large to fit in comfortably.

The shoulder belts are usually used by both men and women, although most seat belts favor men more than women. As an adult, seat belts fit well from the shoulder across the chest while the lap belt goes across the top of the thighs and not the stomach. 

Seat Belts for Children 

There are no specific seat belts for children as they outgrow the booster which they use until they can fit on an adult seat belt at around eight to ten years or a height of 4-9 feet. It’s important to know that children below thirteen must include a ride at the back by law.

When children are not guided well, they may tack the seat belt under their arms at the back, which leaves them not protected on their upper body.

Therefore, it’s advisable to guide and do a counter check if they have put the seat belt in the right way to keep them protected in an accident or sudden braking.

How to Install Rear Seat Belts on a Jeep Wrangler?

  • Before installing your rear seat belts, you need to get suitable seat belts for your Jeep Wrangler.  You can get them from different auto stores store or online stores. The next thing you need to ensure you have a suitable kit for installing. 
  • On your Jeep you there are three holes on the floor and two on the roll bar. The one at the floor center is for females, and the rest two on the outer are for lap belts, while the ones at the rill bar are for shoulder belts. 
  • Whether you install new or aftermarket belts, you will need the belt kit, which includes all the bolts you will need. It’s easier to use an almost similar bolt than you had earlier. Your Jeep may have both the shoulder and lap belts maybe be connected to the roll bar. 
  • To install the rear seat belts, use the two mounts located on the right and left sides of the rear seats. Find the dread whiles where you will use bolts your seatbelts if there are any bolts just what you may have there. 
  • Use the right bracket on the male side and the left on the female side connecting both the shoulder and lap belt as it is an offense to have only a lap belt in some states.
  • Bolt your pieces on the bolt hole with having washer coming next to the bolt hole, then seat belt, spring nut and finalize with bolt belt and bolt them tightly. 

How to Replace Seat Belt on a Jeep Wrangler?

Replacing a belt for your Jeep Wrangler is quite simple and does not require you to have special mechanical knowledge. Modern belts consist of two main parts, the strep and the buckle. The tools you need for replacing your belt are a screwdriver and a spanner

How to Install Rear Seat Belts in a Jeep Wrangler?

Start by unbolting the seat belt from the main fixing points. The shoulder strap has two issues: fixing the lap belt, but there is no fixing point. And you will need to lift the chairs to access the fixing end. 

You can use a new belt or aftermarket belt to replace the belt you intend to return. Use the brackets that come with the strap but ensure you buy and use grade eight bolts to attach the waistband. Then, using the same installation procedure, put up your new belt and check if the retractor is working as required. 

How to Fix a Locked Seat Belt?

Now you can put your new retractor and all the seat belt unit in all the holes well lined up and screw all the bolts. You can add any additional bolts if need be and bolt them tightly. Once you are done with bolting and the seat belt is in place, pull the belt out to check if the retractor works perfectly. 

To properly check if your belt is working correctly, pull it in a different direction, inserting a considerable force. Then, check if all the bolts are tight. If everything seems in place, then you are ready to go. 

How Often Should You Change Your Seat Belts?

Seat belts are safety devices in cars that limit or reduce injury during an automotive accident. Unfortunately, most drivers and passengers don’t take seat belts seriously, but it reduces the risk of injury or even death. 

Unlike other parts of a car, seat belts do not degrade fast and can be used for decades. They are designed to last for long. Seat belts are considered one of the road safeties measures by many states and require every car owner to have a proper work-in belt. 

Although you don’t need to service your seat belts, there are instances where you are required to replace them. These seat belts are designed to last longer, and they are also designed to work once like airbags. 

Seat belts have retractors that hold you in place and prevent you from moving to the front or side in an accident. It is advisable always to change seat belts after you had an accident to ensure you get the same protection they are designed to offer. In addition, the straps may sometimes lock up and may need to be replaced or fixed up. 

Experts advise you to go for a belt checkup after ten to fifteen years of service or get them replaced altogether for your safety. Seat belts can only protect you and your passengers only when they are in good working condition. 

Fixing a Stuck Seat Belt 

Seat belts are vital for your safety and that of your passage. However, seat belts sometimes can get jammed, and sometimes you can quickly fix them at other times. They may need further assessment from experts. 

Before you have to your nearest auto shop, you can try to troubleshoot to see if the stuck belt. If the seat belt is stuck while you buckle it up, try unlatching it from the cartridge and slowly pulling it toward the seat.

Let it pull itself back behind the seat, and if it’s not pulling back, it may have twisted or a deeper mechanical problem. 

How to Install Rear Seat Belts in a Jeep Wrangler?

Try accessing the loop and belt mechanism by prying off the plastic cover with a screwdriver. If you are dealing with a rear seat belt, you need to lift the seat to access the belt hardware loop. Pull the belt up to see if there are any tangles or the belt mechanism. 

Advantage of Having a Seat Belt on your Jeep Wrangler 

It is hard to point an individual who invented the seat belts, although Engineer George Cayley designed and made the first lap seat belts in the 1800s, and the seat belts were popular in cars despite many people not using them in 1930. 

Although it took some time before people warmed up to the seat belts because they believed they would trap people in cars in case of an accident. But when the research is done, the findings impressed, and it buckles a norm to put on a seat belt. 

The three-point belt was first developed in 1955 and was designed by Bohlin, a Swedish engineer, and it’s still the same you see to date. The belt came with its advantages listed below. 

Untangle the belt if tangled or remove anything that is maybe hindering the belt from moving back. Now you can test the strap and release it to lock normally. 

It Provides Safety for You and Your Passengers 

A seat belt keeps you and your passage safer in the event of an accident. If you have someone who is not belted, you are likely to move inside the car in case of a sudden break or accident. Apart from sustaining severe injuries, they are likely to injure other passages because their movement is not controlled. 

Keeps You in Place 

Seat belts keep you in place while you drive and in case of an accident. You can be thrown out through the door, window or knock yourself on the windshield with sudden impact.

It applies to all other passages in the car. They are held in place by the belt and sustain far fewer injuries than if they had seat belts. 

Avoiding Law Suits 

The majority of American states require every car to have a belt and everyone using the road to be buckled up.  Some of these states charge a hefty fine. So, you are founding riding without a seat belt in place.

How to Install Rear Seat Belts in a Jeep Wrangler?

You may also have to get driving violations on your driving license record. Considering how simple it is to buckle up, it’s not worth putting a fine or getting a poor record on your driving record. 

Your insurance costs less 

If you have a safety violation on your driving record, it will cost you applying the insurance cover. Again, the insurer will see the violation record, giving them a reason to think you are a high-risk driver hence raising your insurance rate. 

If you have been involved in an accident while driving beltless, your insurance will get the report, and you may lose your insurance coverage. In addition, the Insurance can refuse to grant your claims or even covering the damages. 

You Increase the Chances of Airbag Saving You 

Airbags are less effective and may not save you if you aren’t wearing your seat belt. However, they are designed to work with seat belts because you can be thrown out of the car, or the passengers can bang against each other, causing severe damages. 

Helps Protect Pregnant Women 

The number one thing every pregnant woman can do to protect her unborn baby is ensuring they have buckled up. It keeps them in place without moving when a car has a sudden stop or break. They are advised to use the lap belt below the abdomen. 

You will have a strong Case of Personal Injury 

When you are involved in an accident that is not your fault, you can have a case through your injury attorney. However, it will be hard to have a strong chance if you were beltless when the accident happened. But, if you have your seat belts in place, you will have a solid personal injury case. 

Conclusion 

Seat belts provide drivers and passengers safe when they are used right. Jeep Wrangler is known for off-roading, and it’s crucial to be buckled up or risk being thrown out of the car on rough terrains. Installing rear seat belts does not require special skills; you need to have the right belt, bolts, and tools.